Building energy consultancy Overheating, daylight and energy compliance
For architects, developers, planning consultants, building owners and anyone preparing a planning application. Building energy consultants based in Bristol, delivering projects throughout the UK.
A daylight and sunlight model you can explore
A conceptual model showing how we present daylight and sunlight results. Move the sun through the day and the year, switch between scenes and see which neighbouring properties and amenities are assessed.
Energy, daylight and comfort, handled by one team
Energy, daylight and overheating handled by one team. One appointment and one point of contact, so the window that helps your daylight result does not catch you out on overheating.
Domestic energy compliance
Every new home needs a SAP calculation to pass building regulations under Part L. We work with you across the design stages, with the right advice at each one, from the design calculation to completion for sign-off and the EPC.
More about this serviceNon-domestic energy compliance
Most new non-domestic buildings need an SBEM calculation to show they meet building regulations under Part L, though some use other methods. We run the SBEM assessment, produce the BRUKL report that building control asks for, and issue the EPC at completion.
More about this serviceEnergy & sustainability statements
We write energy statements for planning applications and advise on how to reduce carbon emissions across your scheme. We test different strategies so you can see what each one achieves before you commit to it.
More about this serviceOverheating & comfort
New homes must show they will not overheat in summer to pass building regulations. We model each home in full rather than using the simplified checklist, which usually means fewer limits on glazing and no late redesigns. We carry out Part O and TM59 overheating assessments for homes in Bristol and throughout the UK, and TM52 assessments for non-domestic buildings.
More about this serviceDaylight & sunlight
Daylight and sunlight assessments, to BRE guidelines, check that an extension or new development will not take too much light from its neighbours. We provide the report that supports your planning application.
More about this serviceDynamic thermal simulation
Detailed computer modelling of how a building heats, cools and ventilates, and how the local weather affects it, for the questions a standard calculation cannot answer.
More about this serviceEPCs for existing buildings
Energy performance certificates (EPCs) for existing homes and commercial buildings, whether you are selling, letting or planning a retrofit.
More about this serviceMEES compliance & strategy
New government guidelines mean that rented buildings must meet minimum EPC ratings: C for private and social rented homes by 2030, and B for commercial buildings over 1,000 m² by 2031. We show which improvements are the most cost-effective, and recommend strategies to reach the required rating.
More about this serviceThermal bridge modelling
Thermal bridges can account for around 30% of a building’s heat loss. Modelling them shows where heat escapes and where condensation and mould could form, often turns a fail into a pass without extra insulation, and supports retrofit projects under PAS 2035.
More about this serviceMEP & MCS design
Heat pump sizing and heating design to MCS standards, which grant funding depends on, with the mechanical and electrical design around it.
More about this serviceZero Bills assessment
Checks whether a home’s heat pump, solar and battery setup qualifies for a zero-bills energy tariff, and what to change if it does not.
More about this serviceWorking to your programme
Rayo means a ray of sunlight. We scope clearly up front, model while the design can still change, and report in language a planning officer and an architect both read without translation.
Small-business mindset, large-business capability
People you can call
You deal directly with the people doing the modelling. We answer the phone, work to your programme and tell you early if anything changes.
One team, start to finish
Energy, daylight and overheating assessed by the same team, with advice on what to change rather than a pass or a fail.
Specialist building physics
Dynamic simulation, daylight and compliance modelling to the standards the largest engineering firms work to, at a fee a scheme of any size can carry.
The transition runs plot by plot, not site by site. A home that starts before 24 March 2028 can still be built to the current Part L; the next one on the same site may not. We will model both standards and tell you which plots land where, and what each route costs.
- Heat pump + PVThe notional home now has a heat pump and solar panels. In practice, the end of the gas boiler in new homes.
- Updated SAPA new version of SAP is used to show compliance at launch. The Home Energy Model, which will replace SAP, follows later.
- AirtightnessThe notional home is set at 4 m³/(h·m²) at 50 Pa, and ventilation systems must now be commissioned with a powered flow hood.
- Earlier engagementMore assessment per plot, starting while the design can still absorb the answer.
Regulatory roadmap to the MEES deadlines, 2024 to 2040
Every key date in the MEES and related energy rules, in one place. Dates marked as expected or not yet confirmed may change.
Whoever owns the deadline
Residential developers
Single plots to multi-phase schemes, planning through to as-built sign-off.
Architects
Early-stage advice while the glazing and the massing can still change, not a pass or fail at the end.
Planning consultants
Energy statements and daylight evidence built to answer the officer’s actual objection.
Housing providers
Stock-wide EPC assessment and the retrofit modelling behind a plan to reach EPC C by April 2030.
Landlords & asset managers
MEES gap analysis and a costed route to EPC C for homes by 2030 and EPC B for larger commercial buildings by 2031.
Not sure which you are?
Send the scheme anyway. We will tell you what it needs, and what it does not, including anything you have been quoted for and do not require.
Tell us the scheme and the deadline
Send the drawings, or just the postcode and the unit count. We will come back to you with a scope and a fixed fee.
Thank you for your response. ✨
By sending this form you agree to us using your details to reply to your enquiry. See our Privacy policy.